Scopus verilerinden derlenerek 18.03.2026 tarihinde güncellenmiştir.
Eroğlu, E.S., Akın, M.B., Değermenci, G.D. 2026: Photocatalytic removal of acetamiprid using ZnO and TiO2-doped ZnO: kinetic and degradation pathway analysis.: International Journal of Environmental Science and Technology 23.
Dağ, M., Aydoğmuş, E., Yalçın, Z.G., Arslanoğlu, H. 2026: Valorization of Industrial Waste in Polymer Composites: Enhancing Mechanical and Thermal Properties for Insulation Applications Using Machine Learning Analysis.: Polymer Engineering and Science 66, 470–486.
Özbaş, Z., Özgen, S. 2026: Preparation and Application of pH-Sensitive Pullulan/Xanthan Gum/κ-Carrageenan Film Incorporated Cranberry Anthocyanins.: Packaging Technology and Science 39, 239–255.
Şimşek, B., Uygunoğlu, T., Fidan, U., Dilmaç, Ö.F., Bildi Ceran, Ö. 2026: The hybridization of silver nanoparticles with graphene nanoplatelets, carbon nanotubes, and carbon nanotube nanoribbons to enhance the piezoresistive performance of cementitious composites.: Materials Letters 408.
Ucuncuoglu, D., Korucu, H. 2026: Optimization of reduced graphene oxide synthesis under green and sustainable conditions via Taguchi design.: Materials Science and Engineering: B 324.
Selimoğlu, V., Akin, M.B., Kocakerim, M.M. 2026: Optimizing ulexite-based mineral carbonation for CO2 capture and boron recovery in aqueous systems.: Sustainable Energy Technologies and Assessments 85.
Ceran, Ö.B., Şimşek, B., Uygunoğlu, T., Fidan, U., Eryeşil, Ö. 2026: Engineered cementitious composites with PVA fibers modified with carbon black, graphene nanoplatelets, and aluminum hydroxide nanoparticles.: Materials Letters 411.
Özgen, S., Özbaş, Z. 2026: One-Pot Synthesis of Agar-Gelatin/Poly(Acrylic Acid) for Pb(II) Removal: Optimization by Response Surface Methodology.: Water, Air, and Soil Pollution 237.
Türk, F.N., Uğur, M., Arslanoğlu, H. 2026: Co-pyrolysis of waste tires and Platanus orientalis leaves: thermogravimetric characterization, kinetic modeling, and resource valorization potential.: Biofuels, Bioproducts and Biorefining 20, 297–312.
Ucuncuoglu, D., Bektaş, E., Karakaş, İ.H., Amin Bhuiyan, M.R., Korucu, H. 2025: Eco-friendly reduction of graphene oxide using urea: An optimized approach for high-performance rGO.: Materials Science and Engineering: B 322.
Palas, B., Yılmaz Mertsoy, E. 2025: Hydrophobic and Catalytic Properties MOF Decorated Cotton Fabrics: Comparison of Biopolymeric Coating and Chemical Modification.: ChemistrySelect 10.
Alsabak, B.M.J., Dilmaç, N. 2025: Ferronickel Production via Selective Reduction of Turkish Laterite Ore by H2 in Fluidized Bed Reactor: Isothermal Kinetic Modeling.: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 56, 33–45.
Şimşek, B., Uygunoğlu, T., Fidan, U. 2025: Influence of conductive nanofillers on the mechanical and self-sensing properties of bis(2-ethylhexyl) succinate biopolymer cement composites.: Construction and Building Materials 491.
Şimşek, B., Uygunoğlu, T., Fidan, U. 2025: Influence of polypropylene masterbatch modified with silver nanoparticles additions on the mechanical and electromechanical properties of cementitious composites.: Next Materials 8.
Dağ, M., Aydoğmuş, E., Arslanoğlu, H., Yalçin, Z.G. 2025: Exploring role of polyester composites in biocomposites for advanced material technologies: a comprehensive review.: Polymer-Plastics Technology and Materials 64, 63–87.
Boz, M.A., Akin, M.B., Kocakerim, M.M. 2025: Investigation of the dissolution kinetics and mechanism of calcined dolomite in propionic acid solutions.: Chemical Papers 79, 4763–4779.
Dilmaç, N., Alsalihi, E.A.T. 2025: Production of Highly Metalized Direct Reduced Iron (DRI) in Fluidized Bed by CO and H2: Determination of the Kinetic Triplet.: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 56, 1672–1683.
Türk, F.N., Uğur, M., Arslanoğlu, H. 2025: Comparative Assessment of Lead (Pb) and Zinc (Zn) Leaching Behavior from Zinc Extraction Residues Using Monovalent and Divalent Chloride Salts.: JOM 77, 9150–9161.
Dağ, M., Aydoğmuş, E., Arslanoğlu, H., Yalçin, Z.G., Barlak, S. 2025: Development of Polyurethane-Based Composites With Salt Clay and Industrial Wastes as Fillers: Corrosion, Mechanical Properties, and Machine Learning Insights.: Journal of Vinyl and Additive Technology 31, 1440–1454.
Akın, M.B., Şahin, Ö. 2025: Hydrogen production via methanolysis of sodium borohydride using acetic acid as a catalyst.: Renewable Energy 240.
Aydemir, O., Sattari, R., Küçük, V.A. 2025: Technological quality parameters in chocolate spread: hazelnut roasting process.: Journal of Food Measurement and Characterization 19, 3036–3047.
Şimşek, B., Uygunoğlu, T., Ceran, Ö.B., Fidan, U. 2025: Needle-type and spherical-shaped hydroxyapatite nanoparticles modified with graphene nanoplatelets and silver nanoparticles blended cementitious composites.: Materials Chemistry and Physics 335.
Eyupoglu, V., Akin, M.B., Kaya, S., Çaylak, O., Berisha, A., Çetinkaya, S. 2025: Effective removal of methylene blue dye from aqueous solution using Macrolepiota procera mushroom: Experimental and theoretical studies.: Journal of Molecular Liquids 418.
Mertsoy, E.Y., Yaşa, S., Gençten, M. 2025: Recent progress in the use of Co-, Ni- and Ni/Co-MOF as electrode materials for supercapacitors.: Journal of Alloys and Compounds 1041.
Karakaş, Z.K., Korucu, H. 2025: Characterization of graphene oxide and reduced graphene oxide synthesis by loop method; [Döngü metodu ile grafen oksit ve indirgenmiş grafen oksit sentezinin karakterizasyonu].: Journal of the Faculty of Engineering and Architecture of Gazi University 40, 1371–1384.
Uygunoğlu, T., Şimşek, B. 2025: Evaluation of fresh and hardened properties of cementitious composites modified with bis(2-ethylhexyl) succinate biopolymer.: Construction and Building Materials 471.
Akin, M.B., Sari, M., Eyupoglu, V., Çetintaş, H.İ., Tüzün, B., Çetinkaya, S. 2025: Removal of safranin-O dye from wastewater samples using Kluyveromyces marxianus biomass: Experimental research and theoretical analysis.: Journal of Molecular Liquids 436.
Eker, T.Y., Özgen, S., Özbaş, Z. 2025: Smart pH-Sensitive Indicator Films Based on Gellan Gum/Starch/Xanthan Gum With Aronia Extract: Real-Time Tracking of Chicken Freshness.: Packaging Technology and Science 38, 937–952.
Hussein, M.Y., Yalçın, Z.G., Yaqoob, G.B., Dağ, M. 2025: Investigation of the corrosion‐inhibition effect of Turkish coffee extract on L-80 carbon steel in 15% HCl: thermodynamic and surface analyses.: Petroleum Science and Technology 43, 3757–3795.
Şahin, Ö., Akin, M.B. 2025: Rapid hydrogen evolution from NaBH4 methanolysis using Co–Fe LDH: catalytic efficiency, kinetic modeling, and recyclability.: Research on Chemical Intermediates 51, 5563–5593.
Karakoç, V., Gürkök Tan, T., Arda Küçük, V., Odabaşı, M. 2025: Development of DFO chelator-attached adsorptive membranes for selective removal of Fe3+ ions to obtain clean drinking water.: Journal of Molecular Structure 1339.
Mertsoy, E.Y. 2025: Comparison of 2D and 3D numerical simulation of woody biomass combustion in fluidized bed reactor.: Biomass Conversion and Biorefinery 15, 21227–21246.
Sert, E., Mertsoy, E.Y., Sert, M. 2025: Catalytic Production of Glycerol Carbonate from Glycerol Using Sunflower Stalk-Derived Biochars: Fabrication, Characterization, and Performance Evaluation.: Catalysis Surveys from Asia 29, 127–138.
Özgen, S., Özbaş, Z. 2025: Multifunctional intelligent packaging films incorporated with elderberry anthocyanin for monitoring milk freshness.: Polymer Bulletin 82, 837–859.
Korucu, H. 2025: Multi response optimization of synthesis of boron compounds by Dopting to graphene oxide in the Modified Hummers method.: Materials Science and Engineering: B 311.
Uğur, M., Yartaşı, A., Küçük, Ö., Kocakerim, M.M. 2025: Investigation of dissolution kinetics of colemanite in propionic acid solutions.: Canadian Metallurgical Quarterly 64, 2296–2312.
Akin, M.B. 2024: Hydrogen generation from methanolysis of sodium borohydride using boric acid as a catalyst.: Energy Sources, Part A: Recovery, Utilization and Environmental Effects 46, 5994–6004.
Uygunoğlu, T., Fidan, U., Şimşek, B., Tuncer, A. 2024: Determination of carbonation depth and pH in concrete containing crystalline waterproofing agents using the endoscopic method.: Journal of Building Engineering 94.
Şimşek, B., Ruhkopf, J., Plachetka, U., Rademacher, N., Sawallich, S., Nagel, M., Belete, M., Lemme, M.C. 2024: Graphene and Silver Nanoparticle-Coated Poly(vinyl) Alcohol/Graphene Oxide/Dioctyl Terephthalate: Bis(2-hydroxyethyl) Terephthalate Composite Strain Sensors.: ACS Applied Polymer Materials 6, 9521–9532.
Bal-Öztürk, A., Torkay, G., İdil, N., Akar, R.O., Özbaş, Z., Özkahraman, B. 2024: Propolis-loaded photocurable methacrylated pullulan films: Evaluation of mechanical, antibacterial, biocompatibility, wound healing and pro-angiogenic abilities.: International Journal of Biological Macromolecules 282.
Şimşek, B., Uygunoğlu, T., Fidan, U., Ceran, Ö.B., Eryeşil, Ö. 2024: Graphene nanoplatelet/polypropylene pellets in cement-based composites: Mechanical, piezoresistive and microstructural properties.: Construction and Building Materials 420.
Uğur, M. 2024: Dissolution behavior and kinetic investigation of Ca2+ in the dissolution of colemanite in propionic acid presence saturated with synthetic flue gas.: Journal of Boron 9, 9–18.
Şahin, Ö., Bora Akın, M. 2024: Investigating reaction conditions and kinetics for hydrogen production through boric acid catalysed methanolysis of potassium borohydride.: International Journal of Ambient Energy 45.
Şimşek, B., Ruhkopf, J., Plachetka, U., Rademacher, N., Lemme, M.C. 2024: Polymer and graphene sensors,.
Wang, H., Liu, C., Gong, Z., Jiang, H., Gao, W., Guo, G., Yang, F., Wu, Q., Mertsoy, E.Y., Zhao, J., Liu, J., Ling, H., Shen, B., Wu, D., Sun, H. 2024: CuY@NiAl-Layered double oxides bi-functional composites for “Catalytic–Adsorptive” removal of carbonyl sulfide.: Chemical Engineering Journal 493.
Dağ, M. 2024: Optimization of safflower oil-based polyester biocomposite reinforced with diatomite: An response surface methodology approach and assessment of artificial neural network findings.: Polymers from Renewable Resources 15, 107–132.
Boz, M.A., Küçük, V.A., Akın, M.B. 2024: Investigation of Rapid Chemical Recycling of Waste Polyethylene Terephthalate Under Microwave Effect Using Calcined Dolomite as Catalyst.: Journal of the Turkish Chemical Society, Section A: Chemistry 11, 1025–1036.
Uygunoğlu, T., Şimşek, B., Fidan, U. 2024: Piezoresistive and capacitive cement-based stress sensors designed by incorporating carbon nanotubes doped with graphene nanopowder for structural health monitoring.: Sensors and Actuators A: Physical 374.
Özkahraman, B., Torkay, G., İdil, N., Özbaş, Z., Bal-Öztürk, A. 2024: Antibacterial, Antioxidant, and Healing Potential of Wound Dressings Utilizing Cranberry Extract in Combination with Methacrylated Polyvinyl Alcohol and Methacrylated Sericin.: Regenerative Engineering and Translational Medicine 10, 577–589.
Şimşek, B., Ruhkopf, J., Plachetka, U., Rademacher, N., Belete, M., Lemme, M.C. 2024: Silver Nanoparticle-Assisted Electrochemically Exfoliated Graphene Inks Coated on PVA-Based Self-Healing Polymer Composites for Soft Electronics.: ACS Applied Materials and Interfaces 16, 7838–7849.
Uğur, M. 2024: Dissolution Kinetics for Colemanite Ore in Propionic Acid Solutions Saturated with Pyrite Roasting Gas.: Iranian Journal of Chemistry and Chemical Engineering 43, 2613–2626.
Bal-Öztürk, A., Torkay, G., İdil, N., Özkahraman, B., Özbaş, Z. 2024: Gellan gum/guar gum films incorporated with honey as potential wound dressings.: Polymer Bulletin 81, 1211–1228.
Bhuiyan, M.R.A., Mamur, H., Ustuner, M.A., Korucu, H. 2024: Emerging Opportunities and Challenges of Nanoparticles in Nanomedicine.: Gazi University Journal of Science 37, 1633–1652.
Korucu, H. 2024: Optimization of Graphene Oxide Synthesis Using Hummers Method.: Gazi University Journal of Science 37, 1132–1152.
Hasan, M.K., Ustuner, M.A., Korucu, H., Bhuiyan, M.R.A., Mamur, H. 2024: Influence of Leg Geometry on the Performance of Bi2Te3 Thermoelectric Generators.: Gazi University Journal of Science 37, 1752–1768.
Acar, G., Özkahraman, B., Özbaş, Z. 2023: Thymol incorporated gellan gum/carboxymethyl cellulose/hyaluronic acid films for wound dressings applications.: Cellulose 30, 9517–9528.
Özkahraman, B., Torkay, G., Özbaş, Z., Bal-Öztürk, A. 2023: The effect of vitamin C in the formulation of pectin/thiolated alginate buccal adhesive patches: In vitro and Ex vivo evaluation.: International Journal of Adhesion and Adhesives 120.
Altun, A., Doruk, S., Şara, O.N. 2023: Effect of Al2O3 Nanoparticle Dispersion on the Thermophysical Properties of [EMIM][EtSO4] Ionic Liquid.: International Journal of Thermophysics 44.
Bhuiyan, M.R.A., Mamur, H., Dilmaç, Ö.F. 2023: Zinc Oxide Nanomaterials for Biomedical Applications.: Advances in Organic Synthesis 18, 190–235.
Mohamed, A.M., Gülten, Y.Z., Mustafa, D. 2023: Experimental investigation of the production of biolubricant from waste frying oil.: Biomass Conversion and Biorefinery 13, 6395–6407.
Dağ, M., Aydoğmuş, E., Yalçin, Z.G., Arslanoğlu, H. 2023: Diatomite reinforced modified safflower oil-based epoxy biocomposite production: Optimization with RSM and assessment of outcomes by ANN.: Materials Today Communications 35.
Uğur, M., Şimşek, B., Uygunoğlu, T., Muhtar Kocakerim, M. 2023: Comparison of effectiveness of blending and impregnation applications of dispersed nanoparticles on performance of cementitious composites.: Construction and Building Materials 392.
Şimşek, B., Uygunoğlu, T., Dilmaç, Ö.F., Uğur, M., Sevgili, İ. 2023: Analyzing the effect of tannic acid as a bio-additive and water purification agent in cement pastes.: Materials Letters 350.
Korucu, H., Mohamed, A.I., Yartaşı, A., Uğur, M. 2023: The detailed Characterization of graphene oxide.: Chemical Papers 77, 5787–5806.
Mertsoy, E.Y., Sert, E., Atalay, S., Atalay, F.S. 2023: Deep eutectic solvent incorporated AC/MIL-101 hybrid material catalysts for the production of fuel additives (acetins) from by-product glycerol.: Materials Today Sustainability 24.
Bhuiyan, M.R.A., Korucu, H., Mamur, H., Haque, M.M. 2023: Growth and characterization of Bi2Te2.70Se0.30 nanostructured materials by using a cost-effective chemical solution route.: Journal of Alloys and Metallurgical Systems 4.
Duan, J., Huang, Z., Hu, X., Wang, H., Zhang, Y., Yang, Y., Mertsoy, E.Y., Wu, D., Qi, J., Lu, T. 2023: Elucidating the degradation mechanism of 0.5Gd2Zr2O7·0.5TRPO under multi-energy He ion irradiation.: Journal of the European Ceramic Society 43, 4088–4094.
Durmaz, M., Dilmaç, N., Dilmaç, Ö.F. 2023: Suitability of Hekimhan siderite as oxygen carrier in chemical looping combustion.: International Journal of Global Warming 29, 108–120.
Şimşek, B., Uygunoğlu, T., Uğur, M., Bildi Ceran, Ö., Faruk Dilmaç, Ö. 2023: Experimental investigations of aluminum hydroxide nanoparticles on properties of cementitious composites using macro and micro scale tests.: Construction and Building Materials 401.
Adánez-Rubio, I., Filsouf, A., Durmaz, M., Mendiara, T., Gayán, P., Adánez, J. 2023: Performance of a kaolin-doped, magnetic Cu-based oxygen carrier in biomass combustion.: Powder Technology 426.
Bal-Öztürk, A., Torkay, G., Alarçin, E., Özbaş, Z., Özkahraman, B. 2022: The effect of thiol functional groups on bovine serum albumin/chitosan buccal mucoadhesive patches.: Journal of Drug Delivery Science and Technology 74.
Özkahraman, B., Özbaş, Z., Bayrak, G., Tamahkar, E., Perçin, I., Kılıç Süloğlu, A., Boran, F. 2022: Characterization and antibacterial activity of gelatin–gellan gum bilayer wound dressing.: International Journal of Polymeric Materials and Polymeric Biomaterials 71, 1240–1251.
Çopur, M., Pekdemir, T., Kocakerim, M.M., Korucu, H., Guliyev, R. 2022: Industrial symbiosis: Boron waste valorization through CO2 utilization.: Korean Journal of Chemical Engineering 39, 2600–2614.
Özbaş, Z., Torkay, G., Bal-Öztürk, A., Özkahraman, B. 2022: Preparation of quercetin incorporated photocrosslinkable methacrylated gelatin/methacrylated kappa-carrageenan antioxidant hydrogel wound dressings.: Chemical Papers 76, 7597–7606.
Özbaş, Z., Özkahraman, B., Akgüner, Z.P., Bal-Öztürk, A. 2022: Evaluation of modified pectin/alginate buccal patches with enhanced mucoadhesive properties for drug release systems: In-vitro and ex-vivo study.: Journal of Drug Delivery Science and Technology 67.
Şimşek, B., Uygunoğlu, T. 2022: Synergistic effect of nanoparticles and super absorbent polymer on self-healing ability of cement pastes.: Composites Communications 34.
Şimşek, B. 2022: Investigation of self-healing ability of hydroxyapatite blended cement paste modified with graphene oxide and silver nanoparticles.: Construction and Building Materials 320.
Özen, N., Özbaş, Z., İzbudak, B., Emik, S., Özkahraman, B., Bal-Öztürk, A. 2022: Boric acid-impregnated silk fibroin/gelatin/hyaluronic acid-based films for improving the wound healing process.: Journal of Applied Polymer Science 139.
Bhuiyan, M.R.A., Mamur, H., Ustuner, M.A., Dilmac, O.F. 2022: Current and Future Trend Opportunities of Thermoelectric Generator Applications in Waste Heat Recovery.: Gazi University Journal of Science 35, 896–915.
Şimşek, B., Uygunoğlu, T., Dilmaç, Ö.F. 2022: Comparative evaluation of the effectiveness of PTFE nanoparticles on cement pastes properties with multi-wall carbon nanotubes, graphene oxide and silver nanoparticles.: Construction and Building Materials 319.
Korucu, H. 2022: Evaluation of the performance on reduced graphene oxide synthesized using ascorbic acid and sodium borohydride: Experimental designs‐based multi‐response optimization application.: Journal of Molecular Structure 1268.
Özkahraman, B., Özbaş, Z., Yaşayan, G., Akgüner, Z.P., Yarımcan, F., Alarçin, E., Bal-Öztürk, A. 2022: Development of mucoadhesive modified kappa-carrageenan/pectin patches for controlled delivery of drug in the buccal cavity.: Journal of Biomedical Materials Research - Part B Applied Biomaterials 110, 787–798.
Aydoğmuş, E., Dağ, M., Yalçın, Z.G., Arslanoğlu, H. 2022: Synthesis and characterization of waste polyethylene reinforced modified castor oil-based polyester biocomposite.: Journal of Applied Polymer Science 139.
Aydoğmuş, E., Dağ, M., Yalçın, Z.G., Arslanoğlu, H. 2022: Synthesis and characterization of EPS reinforced modified castor oil-based epoxy biocomposite.: Journal of Building Engineering 47.
Sevgili, İ., Dilmaç, Ö.F., Şimşek, B. 2021: An environmentally sustainable way for effective water purification by adsorptive red mud cementitious composite cubes modified with bentonite and activated carbon.: Separation and Purification Technology 274, 119115.
Dilmaç, N. 2021: Isothermal and non-isothermal reduction kinetics of iron ore oxygen carrier by CO: Modelistic and model-free approaches.: Fuel 296.
Bhuiyan, M.R.A., Mamur, H., Dilmaç, Ö.F. 2021: A review on performance evaluation of bi2te3-based and some other thermoelectric nanostructured materials.: Current Nanoscience 17, 423–446.
Şimşek, B., Doruk, S., Ceran, Ö.B., Uygunoğlu, T. 2021: Principal component analysis approach to dispersed graphene oxide decorated with sodium dodecyl sulfate cement pastes.: Journal of Building Engineering 38.
Altun, A., Şara, O.N., Şimşek, B. 2021: A comprehensive statistical approach for determining the effect of two non-ionic surfactants on thermal conductivity and density of Al2O3–water-based nanofluids.: Colloids and Surfaces A: Physicochemical and Engineering Aspects 626.
Bal-Öztürk, A., Özkahraman, B., Özbaş, Z., Yaşayan, G., Tamahkar, E., Alarçin, E. 2021: Advancements and future directions in the antibacterial wound dressings – A review.: Journal of Biomedical Materials Research - Part B Applied Biomaterials 109, 703–716.
Aydoğmuş, E., Arslanoğlu, H., Dağ, M. 2021: Production of waste polyethylene terephthalate reinforced biocomposite with RSM design and evaluation of thermophysical properties by ANN.: Journal of Building Engineering 44.
Şimşek, B., Ceran, Ö.B., Şara, O.N. 2021: Difficulties in Thin Film Synthesis,.
Uygunoğlu, T., Şimşek, B., Ceran, Ö.B., Eryeşil, Ö. 2021: Novel hybrid fiber reinforced mortar production using polyvinyl alcohol with a blend of graphene oxide and silver nanoparticles.: Journal of Building Engineering 44.
Mamur, H., Dilmaç, Ö.F., Begum, J., Bhuiyan, M.R.A. 2021: Thermoelectric generators act as renewable energy sources.: Cleaner Materials 2.
Özbaş, Z., Özkahraman, B., Bayrak, G., Kılıç Süloğlu, A., Perçin, I., Boran, F., Tamahkar, E. 2021: Poly(vinyl alcohol)/(hyaluronic acid-g-kappa-carrageenan) hydrogel as antibiotic-releasing wound dressing.: Chemical Papers 75, 6591–6600.
Tamahkar, E., Özkahraman, B., Özbaş, Z., İzbudak, B., Yarimcan, F., Boran, F., Öztürk, A.B. 2021: Aloe vera-based antibacterial porous sponges for wound dressing applications.: Journal of Porous Materials 28, 741–750.
Dilmaç, Ö.F., Şimşek, B. 2021: Statistical analysis of thermal reduced graphene oxide properties; [Termal Olarak İndirgenen Grafen Oksidin Özelliklerinin İstatistiksel Analizi].: El-Cezeri Journal of Science and Engineering 8, 1123–1134.
Şimşek, B. 2020: Multi-walled carbon nanotubes with different features reinforced cement pastes: A compressive and systematic approach using principal component analysis.: Journal of Building Engineering 32.
Dilmaç, Ö.F., Dilmaç, N., Doruk, E.T. 2020: Performance of electric arc furnace slag as oxygen carrier in chemical-looping combustion process.: Fuel 265.
Şimşek, B., İç, Y.T. 2020: Fuzzy failure mode and effect analysis application to reduce risk level in a ready-mixed concrete plant: A fuzzy rule based system modelling approach.: Mathematics and Computers in Simulation 178, 549–587.
Özkahraman, B., Özbaş, Z. 2020: Removal of Al(III) Ions Using Gellan Gum-Acrylic Acid Double Network Hydrogel.: Journal of Polymers and the Environment 28, 689–698.
Durmaz, M., Dilmaç, N., Dilmaç, Ö.F. 2020: Evaluation of performance of copper converter slag as oxygen carrier in chemical-looping combustion (CLC).: Energy 196.
Mehmet, T., Hasan, I., M. Muhtar, K., Mehmet, Ç., Özkan, K. 2020: The conversion kinetics of tincal to boric acid in nitric acid solutions.: Iranian Journal of Chemistry and Chemical Engineering 39, 83–90.
Akyüz, T., Akın, M.B. 2020: Antibacterial Effect Of Zno Crystals On Foodborne Pathogens: An Optimization Study.: Journal of Microbiology, Biotechnology and Food Sciences 10, 484–489.
Şimşek, B. 2020: Bis-hydroxyethyl terephthalate cementitious composites properties: A comparative study including hydrogen bonding mechanism with the dioctyl terephthalate.: Construction and Building Materials 258.
Çınar, E., Uygunoğlu, T., Şimşek, B., Topçu, İ.B. 2020: Effect of carbon black on electrical curing of fresh concrete for cold regions.: Construction and Building Materials 247.
Ceran, Ö.B., Şimşek, B., Şara, O.N. 2020: Preparation and characterization novel dioctyl terephthalate blended polyvinyl alcohol-composite films incorporated with the graphene oxide and silver nanoparticles.: Polymer Testing 82.
Karaipekli, A., Erdoğan, T., Barlak, S. 2019: The stability and thermophysical properties of a thermal fluid containing surface-functionalized nanoencapsulated PCM.: Thermochimica Acta 682.
Korucu, H., Şimşek, B., Güvenç, A.B., Küçük, V.A. 2019: Homogeneous graphene oxide production with the variance reduction techniques: Taguchi method with the principal component analysis.: Vibrational Spectroscopy 104.
Korucu, H., Şimşek, B., Kocakerim, M.M., Karakaş, I.H. 2019: Effective reduction of graphene oxide using sulfur dioxide-containing chemical compounds.: International Journal of Environmental Science and Technology 16, 8329–8342.
Şimşek, B., Pakdil, F., Iç, Y.T., Güvenç, A.B. 2019: Building a Graphical User Interface for Concrete Production Processes: A Combined Application of Statistical Process Control and Design of Experiment.: Arabian Journal for Science and Engineering 44, 4373–4393.
Şimşek, B., Sevgili, I., Ceran, Ö.B., Korucu, H., Şara, O.N. 2019: Nanomaterials based drinking water purification: Comparative study with a conventional water purification process.: Periodica Polytechnica Chemical Engineering 63, 96–112.
Korucu, H., Şimşek, B., Uygunoğlu, T., Güvenç, A.B., Yartaşı, A. 2019: Statistical approach to carbon based materials reinforced cementitious composites: Mechanical, thermal, electrical and sulfuric acid resistance properties.: Composites Part B: Engineering 171, 347–360.
Şimşek, B. 2019: TOPSIS based Taguchi design optimization for CVD growth of graphene using different carbon sources: Graphene thickness, defectiveness and homogeneity.: Chinese Journal of Chemical Engineering 27, 685–694.
Ceran, Ö.B., Şimşek, B., Uygunoğlu, T., Şara, O.N. 2019: PVC concrete composites: comparative study with other polymer concrete in terms of mechanical, thermal and electrical properties.: Journal of Material Cycles and Waste Management 21, 818–828.
Şimşek, B., Sevgili, İ., Ceran, Ö.B., Korucu, H. 2019: Tools and techniques for purification of water using nano materials,.
Ceran, Ö.B., Şimşek, B., Doruk, S., Uygunoğlu, T., Şara, O.N. 2019: Effects of dispersed and powdered silver nanoparticles on the mechanical, thermal, electrical and durability properties of cementitious composites.: Construction and Building Materials 222, 152–167.
Üçüncüoǧlu, D., Küçük, V.A. 2019: A multivariate data approach for FTIR-ATR monitoring of virgin olive oils: Lipid structure during autoxidation.: OCL - Oilseeds and fats, Crops and Lipids 26.
Küçük, V.A., Çınar, E., Korucu, H., Şimşek, B., Bilge Güvenç, A., Uygunoğlu, T., Kocakerim, M.M. 2019: Thermal, electrical and mechanical properties of filler-doped polymer concrete.: Construction and Building Materials 226, 188–199.
Kucuk, V.A., Kocakerim, M.M. 2019: Effects of leaching parameters on the impurity ion concentrations at ulexite ore leaching: An experimental design approach.: Iranian Journal of Chemistry and Chemical Engineering 38, 245–255.
Şimşek, B., Taş, E., Sabah, E. 2019: Modeling and optimization of the flocculation process of polydisperse travertine suspension employing an eco-friendly hybrid flocculant.: Arabian Journal of Geosciences 12.
Korucu, H., Şimşek, B., Yartaşı, A. 2018: A TOPSIS-Based Taguchi Design to Investigate Optimum Mixture Proportions of Graphene Oxide Powder Synthesized by Hummers Method.: Arabian Journal for Science and Engineering 43, 6033–6055.
Şimşek, B. 2018: Modeling and optimization of standard concrete containing granule blast furnace slag: A gene expression modeling based multi-response weighted non-linear programming application.: International Journal of Industrial Engineering : Theory Applications and Practice 25, 490–506.
Uygunoğlu, T., Topçu, İ.B., Şimşek, B. 2018: Influence of steel-fiber type and content on electrical resistivity of old-concrete.: Computers and Concrete 21, 1–9.
Şimşek, B., Uygunoğlu, T. 2018: Thermal, electrical, mechanical and fluidity properties of polyester-reinforced concrete composites.: Sadhana - Academy Proceedings in Engineering Sciences 43.
Özkahraman, B., Özbaş, Z., Bal Öztürk, A. 2018: Synthesis of Ion-Imprinted Alginate Based Beads: Selective Adsorption Behavior of Nickel (II) Ions.: Journal of Polymers and the Environment 26, 4303–4310.
Şimşek, B., Uygunoğlu, T., Korucu, H., Kocakerim, M.M. 2018: Analysis of the effects of dioctyl terephthalate obtained from polyethylene terephthalate wastes on concrete mortar: A response surface methodology based desirability function approach application.: Journal of Cleaner Production 170, 437–445.
Mamur, H., Dilmac, O.F., Korucu, H., Bhuiyan, M.R.A. 2018: Cost-effective chemical solution synthesis of bismuth telluride nanostructure for thermoelectric applications.: Micro and Nano Letters 13, 1117–1120.
Elçiçek, H., Kocakerim, M.M. 2018: Leaching kinetics of ulexite ore in aqueous medium at different CO2 partial pressures.: Brazilian Journal of Chemical Engineering 35, 111–122.
Özmetin, E., Kocakerim, M.M. 2018: Removal of methylene blue dye from aqueous solutions by illite clay.: Desalination and Water Treatment 124, 279–286.
Özbaş, Z., Özkahraman, B., Bal Öztürk, A. 2018: Controlled release profile of 5-fluorouracil loaded P(AAM-co-NVP-co-DEAEMA) microgel prepared via free radical precipitation polymerization.: Polymer Bulletin 75, 3053–3067.
Şimşek, B., Dilmac, Ö.F. 2018: Main effects analysis of graphene grown by chemical vapor deposition using orthogonal arrays; [Ortogonal dizinler kullanarak kimyasal buhar çöktürme yöntemi ile büyütülen grafenin ana etkiler analizi].: Journal of the Faculty of Engineering and Architecture of Gazi University 33, 649–663.
Şimşek, B., Ultav, G., Korucu, H., Yartaşi, A. 2018: Improvement of the graphene oxide dispersion properties with the use of TOPSIS based Taguchi application.: Periodica Polytechnica Chemical Engineering 62, 323–335.
Küçük, Ö., Korucu, H. 2018: Optimization of Boric Acid Extraction From Colemanite With An Environmentally Friendly Process By Using The Taguchi Method.: Journal of the Chemical Society of Pakistan 40, 437–446.
Karagöz, Ö., Çopur, M., Kocakerim, M.M. 2018: Kinetic analysis of retention of SO2 using waste ulexite ore in an aqueous medium.: Journal of Hazardous Materials 353, 214–226.
Şimşek, B., Uygunoğlu, T. 2018: A full factorial-based desirability function approach to investigate optimal mixture ratio of polymer concrete.: Polymer Composites 39, 3199–3211.
Şimşek, B., Uygunoğlu, T., Korucu, H., Kocakerim, M.M. 2018: Performance of dioctyl terephthalate concrete,.
Ozbas, Z., Demir, S., Kasgoz, H. 2018: Adsorption Studies of PVA Based Thermosensitive Polymers in Heavy Metal Removal.: Journal of Polymers and the Environment 26, 2096–2106.
Doruk, S., Şara, O.N., Karaipekli, A., Yapıcı, S. 2017: Heat transfer performance of water and Nanoencapsulated n-nonadecane based Nanofluids in a double pipe heat exchanger.: Heat and Mass Transfer/Waerme- und Stoffuebertragung 53, 3399–3408.
Dilmaç, N., Dilmaç, Ö.F., Yardımcı, E. 2017: Utilization of Menteş iron ore as oxygen carrier in Chemical-Looping Combustion.: Energy 138, 785–798.
Şimşek, B., Uygunoǧlu, T. 2017: A design of experiment application to improve raw materials utilization ratio of polymer concrete composites.: Journal of Engineering Research 5, 1–18.
Çopur, M., Karagöz, Ö., Kocakerim, M.M. 2017: Determination of Optimal Conditions for Retention of Sulfur Dioxide by Waste Ulexite Ore in an Aqueous Medium.: Chemical Engineering Communications 204, 907–915.
Oner, M., Akyol, E., Akin, M.B. 2016: Controlling of calcium oxalate crystallization by using crosslinked polymers,.
Şimşek, B., İç, Y.T., Şimşek, E.H. 2016: Hybridizing a fuzzy multi-response Taguchi optimization algorithm with artificial neural networks to solve standard ready-mixed concrete optimization problems.: International Journal of Computational Intelligence Systems 9, 525–543.
Barlik, N., Keskinler, B., Kocakerim, M.M. 2016: Hexavalent chromium removal performance of anionic functionalized monolithic polymers: Column adsorption, regeneration and modelling.: Water Science and Technology 73, 1279–1286.
Barlak, S., Sara, O.N., Karaipekli, A., Yapıcı, S. 2016: Thermal Conductivity and Viscosity of Nanofluids Having Nanoencapsulated Phase Change Material.: Nanoscale and Microscale Thermophysical Engineering 20, 85–96.
Gülen, J., Akın, B., Özgür, M. 2016: Ultrasonic-assisted adsorption of methylene blue on sumac leaves.: Desalination and Water Treatment 57, 9286–9295.
Ozbas, Z., Sahin, C.P., Esen, E., Gurdag, G., Kasgoz, H. 2016: The effect of extractant on the removal of heavy metal ions by thermoresponsive cellulose graft copolymer.: Journal of Environmental Chemical Engineering 4, 1948–1954.
Şimşek, B., İç, Y.T., Şimşek, E.H. 2016: A RSM-Based Multi-Response Optimization Application for Determining Optimal Mix Proportions of Standard Ready-Mixed Concrete.: Arabian Journal for Science and Engineering 41, 1435–1450.
Şimşek, B., Uygunoǧlu, T. 2016: Multi-response optimization of polymer blended concrete: A TOPSIS based Taguchi application.: Construction and Building Materials 117, 251–262.
Barlık, N., Keskinler, B., Kocakerim, M.M., Akay, G. 2016: Functionalized PolyHIPE polymer monoliths as an anion-exchange media for removal of nitrate ions from aqueous solutions.: Desalination and Water Treatment 57, 26440–26447.
Levent, M., Kaya, Ö., Kocakerim, M.M., Küçük, Ö. 2016: Sulphur removal from Artvin-Yusufeli lignite with acidic hydrogen peroxide solutions.: International Journal of Global Warming 10, 178–195.
Dİlmaç, N., Yörük, S., Gülaboğlu, Ş.M. 2015: Investigation of Direct Reduction Mechanism of Attepe Iron Ore by Hydrogen in a Fluidized Bed.: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 46, 2278–2287.
Barlak, S., Karaipekli, A., Nuri Sara, O., Yapici, S. 2015: Preparation and characterization of nanoencapsulated n-nonadecane for convective heat transfer,.
Dilmaç, N., Dilmaç, O.F., Şara, O.N., Yörük, S. 2015: Utilization of iron oxides in chemical looping combustion processes,.
Copur, M., Kizilca, M., Kocakerim, M.M. 2015: Determination of the Optimum Conditions for Copper Leaching from Chalcopyrite Concentrate Ore Using Taguchi Method.: Chemical Engineering Communications 202, 927–935.
Doǧan, T.H., Yartaşi, A. 2014: Optimization of dissolution of ulexite in phosphate acid solutions.: Journal of the Chemical Society of Pakistan 36, 601–605.
Uslu, M., Ulutürk, H., Yartaşi, A., Döker, S. 2013: A sensitive method for selective determination of vanadium species by dispersive liquid-liquid microextraction (DLLME) with spectrophotometric detection.: Toxicological and Environmental Chemistry 95, 1638–1649.
Dilmac, N., Yörük, S., Gülaboglu, Ş.M. 2012: Determination of reduction degree of direct reduced iron via FT-IR spectroscopy.: Vibrational Spectroscopy 61, 25–29.
Mert, M.S., Dilmaç, Ö.F., Özkan, S., Karaca, F., Bolat, E. 2012: Exergoeconomic analysis of a cogeneration plant in an iron and steel factory.: Energy 46, 78–84.
Can, B.Z., Ceylan, Z., Kocakerim, M.M. 2012: Adsorption of boron from aqueous solutions by activated carbon impregnated with salicylic acid: Equilibrium, kinetic and thermodynamic studies.: Desalination and Water Treatment 40, 69–76.
Yilmaz, A.E., Boncukcuoğlu, R., Bayar, S., Fil, B.A., Kocakerim, M.M. 2012: Boron removal by means of chemical precipitation with calcium hydroxide and calcium borate formation.: Korean Journal of Chemical Engineering 29, 1382–1387.